Woodworkers, carpenters and hobbyists like the drill press because it offers more power and accuracy, allowing them to drill larger holes and work with tougher materials. Here’s what you should know to find the perfect drill press from Allwin power tools:

Sufficient Horsepower

First, you should consider drill press that is more  than 1/2HP. For example, ALLWIN has a 2/3HP 12-inch drill press. This variable-speed drill press has plenty of power to handle almost anything you need it to do.

Swing Size

Swing size is the distance from the center of the chuck to the column times two, if you determine you’ll be drilling holes more than six inches from the edge of your workpieces, you will need to look at something larger than a 12-inch drill press.

Depth Stop

A depth stop is an essential feature if you are going to be drilling several holes at the same depth. For example, if you need to drill 12 holes and all of them must be 2” deep, the depth stop will ensure that all twelve holes will be the same 2” depth.

Stroke Distance

Stroke distance is often referred to spindle travel, and it measures the maximum depth a spindle, drill chuck and drill bit can travel as the operator rotates the feed handle without moving the table up.

Digital Readout

A digital readout on a drill press is a helpful feature that displays the running speed and eliminates guessing your RPMs.

Choose a Drill Chuck With a Large Capacity and a Chuck Key

If you intend to drill relatively large diameters, it’s more secure to tighten the chuck with a wrench or chuck key.

Work table

You’ll want a work table you can adjust up or down depending on the size of the workpiece and the depth of the drilled holes.

Benefits of Owning Allwin Drill Press

Allwin Drill presses are faster and allow for more accurate drilling, which allows the user to drill more uniform holes and drill through harder surfaces.

Please send message to us at the bottom of each product page or you can find our contact information from the page of "contact us" if you are interested in Allwin benchtop drill press or floor drill press.